81
19. Note that the MENU/EXIT button now displays STOP. The
sequence can be stopped at any time by pressing this button
and the standard menu display returns.
17. The unit is now ready for sequence start. Note that the
MENU/EXIT button now diplays START instead:
18. Press START to set the sequence running.
15. Press either
or to make a COUNT setting.
This setting controls the number of exposures in the
sequence.
16. Press OK to confirm all the settings.
13. Press either
or to make a DELAY setting.
This setting controls the amount of time between each
exposure in the sequence.
14. Press to select COUNT.
11. Press either the
or button to make an INITIAL DELAY
setting.
This setting controls the amount of time that elapses
before the first exposure in the sequence.
12. Press to select DELAY.
11 12
13 14
15 16
17 18
19
To Next Page
Loading...
