103
H4D
options available
CUSTOM OPTIONS
1 2
3 4
5 6
7
4 Settings / 4.1 Custom Options
4 Settings
From the Settings screen you can access three main sub-settings:
Custom options, Image Info and System status by turning the
front control wheel. From each of these three sub-settings you
can access further screens. Custom options has 30 screens, Im-
age info has two more screens each with more choices and Sys-
tem status has two more screens. Look at the main menu chart
to get an idea of where all the options are on the menu tree.
4.1 Custom options
1) Press the MENU button on the grip.
2) Turn the front control wheel until Settings appears.
3) Press the ISO/WB (Enter) button on the grip.
4) Turn the front control wheel to access 4.1 Custom options.
5) Press the ISO/WB (Enter) button to access the more than 25
choices available.
6) Turn the front control wheel to the desired Option.
7) Turn the rear control wheel to the desired Setting.
8) Press Save
In the following list, the options marked in red are the default set-
tings. So, in the case of the User button, for example, as None is
the default there will be no reaction from the camera until you
make a speci c choice and save it.
If you want to reset the camera to the default setting for all op-
tions, press the ON.OFF button quickly to enter Profi les, select
Standard and then press Load.
MENU
Save
ISO/WB
Note
As a shortcut to the Custom Option lev-
el, press MENU and then the USER but-
ton. After making any changes, press
the shutter release button to save the
new setting.
8
To Next Page
Loading...
