Hasselblad H4D 50 - 8 DCU - Initial Settings 53 26; Setting the Menu Language

54
H4D
1 2
3 4
5 6
Getting started
The initial general setting is language choice. This choice is
retained but can be changed at any time. You can choose be-
tween:
ENGLISH
GERMAN
FRENCH
ITALIAN
SPANISH
JAPANESE
CHINESE
Before each shoot an ISO and a white balance setting should
be made (white balance is for your convenience regarding the
appearance of the image on the display though; it will not a ect
the raw  le. See next chapter for details).
Although the description below illustrates how the language
choice is set, it is also a general introductory illustration of how
settings are changed.
Setting the menu language
Proceed as follows:
1. Press the MENU/EXIT ( ) button to open the menu.
2. Press the
NAVIGATOR button ( and ) to select the
SETTINGS sub-menu.
3. Press the
NAVIGATOR button () to open the SETTINGS menu.
4. Press the
NAVIGATOR button () to select the USER INTERFACE
sub-menu.
5. Press either
ZOOM button (
+
or
–
) to choose a new lan-
guage (in this case, Spanish).
6. Press the
MENU/EXIT ( ) button again to close the menu.
If an item on the menu is dimmed (for example, in  g. 4 "Cam-
era" and "GPS" are dimmed), it signi es that the item is not cur-
rently accessible.