Hasselblad H4D-60 - Drive

117
H4D
2
4
Drive
There are two drive modes: Single and Continuous.
Single and Continuous
In Single mode, a capture is made when the shutter release
button is pressed and the camera is made ready for the next
capture. To make the next capture however, you must first release
the shutter release button and then press again.
In
Continuous mode, the camera automatically makes captures
and makes ready for the next capture in a continuous manner as
long as you maintain pressure on the shutter release. Please note
the speed is dependent on the time taken to save the capture
according to equipment.
In camera active mode:
1) Press the MENU button on the grip.
2) Turn the front control wheel to Drive
3) Press Enter (ISO/WB button).
4) Turn the front control wheel to Single or Continuous
5) Press Save to store the setting.
MENU
F
ISO / WB
Save
ISO / WB
Enter
F
1
3
5
5 Drive