Hasselblad H4D-60 - Delete

87
H4D
Delete
The storage settings allow you to format media and create new
batches. You can also set the initial approval status (green or
yellow) assigned to new pictures.
The first item on the storage list is file deletion. The great
advantage of digital capture is of course the ability to judge
images on the spot, delete them immediately if necessary and
thereby make room for more valuable captures.
The H4D enables you to delete images using any of the following
techniques:
 • Deleteaselectedimageonly
 • Deletefromabatch:
all red-status images
all red- or yellow-status images
all images
 • Deletefromamedium:
all red-status images
all red- or yellow-status images
all images
Deleting single images
1. Use the
–
button to go to the nine-thumbnail (in this case)
view to make an initial search.
2. Use the navigator button to select the image you wish to
delete. When you are viewing thumbnails, the selected image
has a coloured border around it. When you are viewing single
images, the selected image is the one currently shown. (You
can delete an image either from single image view or from
thumbnail view).
3. Select MAIN MENU > STORAGE
4. Press  to open the Delete dialog.
5. You are now shown a full-size preview of the selected image
and asked to confirm the delete. Press OK.
6. You now return to the main menu. Notice that the unwanted
image has been deleted and the batch only contains the
three remaining images. Press the menu button to exit the
menu system.
or:
1. Use the
–
button to make an initial search and then the
+
button to reach full-size preview.
2. Hold down  on the navigator button to open the Delete
dialog.



Tip
Delete shortcut
1 2
3
4
5 6
Select an image and then press and hold  until the confirm
delete dialog opens.