To Next PageTo Next Page
Need help?Do you have a question about the Haswill STC-8080A+ and is the answer not in the manual?
The STC-8080A+ Thermostat is a specialized defrosting thermostat designed to manage refrigeration and defrosting cycles, ensuring optimal performance and temperature control for various applications. This device is equipped with two output relays, allowing it to connect and independently control both the refrigeration unit and the defrosting unit. This dual-relay system provides precise management over the cooling and defrosting processes, which is crucial for maintaining stable temperatures and preventing ice buildup in refrigeration systems.
One of the primary functions of the STC-8080A+ is its ability to regulate temperature by initiating or stopping refrigeration based on predefined settings. Users can configure the desired temperature range by setting a "Temperature for Refrigeration Starts" (F1) and a "Temperature for Refrigeration Stops" (F2). The device continuously monitors the real-time temperature, and when the measured temperature rises to or above F1, the refrigeration unit is activated. Conversely, when the temperature drops below F2, the refrigeration unit is deactivated. This ensures that the controlled environment remains within the specified temperature boundaries, preventing spoilage or damage to stored items.
Beyond basic temperature control, the STC-8080A+ excels in its defrosting capabilities. It includes parameters such as "Defrosting Cycle / Interval Time" (F4) and "Defrosting Lasting Time" (F5). These settings allow users to schedule defrosting operations at regular intervals and specify how long each defrosting cycle should last. This automated defrosting mechanism is vital for preventing excessive ice accumulation on evaporator coils, which can significantly reduce the efficiency of the refrigeration system and increase energy consumption. By regularly clearing ice, the thermostat helps maintain optimal heat exchange and ensures consistent cooling performance.
A key usage feature of this thermostat is its alarm function. The device can be configured to trigger an alarm if the temperature exceeds a preset over-temperature threshold (F6). This "Over-temperature to Trigger Alarm" feature provides an important safety mechanism, alerting users to potential issues such as system malfunctions or power failures that could lead to undesirable temperature increases. The alarm acts as an early warning system, allowing for timely intervention to protect valuable contents.
The configuration process for the STC-8080A+ is designed to be user-friendly, although it requires careful attention to detail. Users can access the function menu to adjust various parameters. The general procedure involves holding the "Set" key for a few seconds to enter the configuration mode, then using arrow keys to navigate to the desired function (e.g., F1, F2, F4, F5, F6). Once the desired function is selected, the "Set" key can be pressed again to view the existing value. To change the value, users typically press and hold the "Set" key while simultaneously using the arrow keys to increment or decrement the value. After setting the new value, releasing all keys saves the change. This systematic approach ensures that users can precisely tailor the thermostat's operation to their specific needs.
For convenience, the device also includes a "Forced Refrigeration" mode, which can be activated by holding a specific key for a few seconds. This mode allows users to manually initiate a defrosting cycle, which can be useful for maintenance or in situations where immediate defrosting is required outside of the scheduled cycles. Repeating the action stops the forced defrosting.
An important aspect of the STC-8080A+ is its wiring. The manual explicitly states that "This unit does not output AC electricity; hence you have to wire all live and null wires to each port; you may use the jumper wire conveniently." This indicates that the thermostat acts as a switch, controlling the flow of electricity to the refrigeration and defrosting units rather than supplying power itself. Therefore, proper wiring, including connecting both live and neutral wires to each port, is essential for correct operation. The mention of using a jumper wire conveniently suggests that certain connections might be simplified with jumpers, but users should always refer to the detailed wiring diagram to ensure safe and correct installation.
In terms of maintenance features, while the manual does not explicitly detail a maintenance schedule, the design of the STC-8080A+ inherently contributes to system longevity and reduced maintenance needs. By automating defrosting, it prevents ice buildup that could strain the refrigeration compressor and other components. The over-temperature alarm also aids in proactive maintenance by flagging issues before they escalate into major failures. The calibration feature (F3), which allows for "Calibration = Real – Measured," enables users to fine-tune the temperature readings if there's a discrepancy between the thermostat's sensor and an external reference. This ensures accuracy over time, which is critical for effective temperature control and can help in diagnosing sensor-related issues.
It is also highlighted that this unit controls defrosting "only by the time, but not by the evaporator temperature." This distinction is crucial. Unlike more advanced controllers that might use an evaporator sensor to determine when defrosting is truly needed based on ice presence, the STC-8080A+ relies solely on the programmed time intervals (F4 and F5). While this simplifies the control logic and potentially reduces cost, it means that defrosting will occur regardless of whether ice has actually formed. Users must therefore carefully set the defrosting intervals and durations to balance energy efficiency with effective ice removal for their specific application. This approach requires a good understanding of the system's typical ice formation rates.
The quick start guide provided is intended to offer a concise overview of the device's key points and functions, rather than a comprehensive step-by-step manual. For a full understanding and detailed instructions, users are advised to consult the "Full-Content Version User Manual." This suggests that while the quick guide covers essential setup and operation, more in-depth information, troubleshooting, and advanced configurations would be found in the complete manual.
Overall, the STC-8080A+ Thermostat is a robust and functional device for managing refrigeration and defrosting. Its dual-relay control, configurable temperature ranges, automated defrosting cycles, and alarm capabilities make it a versatile tool for maintaining controlled environments. The emphasis on proper wiring and the time-based defrosting mechanism are important considerations for users, requiring careful setup and understanding to achieve optimal performance and ensure the longevity of the connected refrigeration system. Its design focuses on reliable, straightforward temperature and defrost control, making it suitable for applications where consistent environmental conditions are paramount.
General| Accuracy | ±1°C |
|---|---|
| Sensor Type | NTC sensor |
| Relay Output Capacity | 10A/250VAC |
| Power Consumption | ≤3W |
| Control Type | On/Off |
| Mounting | Panel Mount |
| Power Supply | 220VAC |
| Relative Humidity | 20% to 85% |
| Display | LED |
