Haswill STC-9200 - Fan Delay Time (F15); Fan Output Modes (F13)

7 / 9
13) F15 (FOD): Time delay seconds for the Fan
A. < 0: in this case, f15 (FOD) is the period for the
Fan starts earlier than the compressor starts, Fan
stops if defrosting begins.
B. ≥0: Fan was controller by F13 (FMC).
14) F13: Fan output modes when f15 (FOD) ≥ 0
A. 0 (CTR): Fan Starts by F14 (FOT), Stop by F16
(FST).
B. 1 (O-N): continuous working except defrosting.
C. 2 (C-N): in this case, F15 (FOD) is the time for the
Fan to start later than the compressor; the