What to do if my Hatco Heater is on but not heating?
If the Hatco Heater is turned on but not producing heat, first verify that the unit is receiving power by checking and resetting the circuit breaker, if necessary. If the issue persists, the switch might be defective, requiring assistance from an Authorized Service Agent or Hatco.
Why is my Hatco GLOMAX GM5AH Heater not hot enough?
If your Hatco Heater isn't providing adequate heat, consider the following: * Ensure the unit is not mounted too high; lower it to bring the heat closer to the target area. * Reduce excessive air movement around the heater by redirecting air conditioning ducts or exhaust fans. * Verify the power supply matches the unit's rating; correct any discrepancies.
Why is my Hatco GLOMAX GM5AH too hot?
If your Hatco Heater is generating excessive heat, ensure the unit is installed within specified parameters for its type and model. If it's too close to the target area, increase the mounting height. Also, check that the power supply matches the unit's rating and correct any discrepancies to avoid overvoltage.
Why do the control switches on my Hatco Heater burn out?
If the control switches on your Hatco Heater are burning out, relocate the remote control box away from the heat zone, ensuring the ambient temperature does not exceed 40°C (104°F). Additionally, ensure you are using genuine Hatco replacement parts, as they are designed to operate safely within the unit's environment. Contact an Authorized Service Agent or Hatco to replace any non-genuine switches with genuine Hatco parts.
How to fix the lights on a Hatco GLOMAX GM5AH Heater (GM5AHL) when they don't work?
If the lights are not working on your Hatco Heater (GM5AHL model only), the LED assembly may be defective, requiring assistance from an Authorized Service Agent or Hatco. It could also be due to faulty wiring.
Why is the Hatco Heater not hot enough?
If the heat from your Hatco Heater is inadequate, try lowering the unit to bring the effective heat closer to the target area. Also, restrict or redirect any excessive air movement, such as from an air conditioning duct or exhaust fan, away from the heater's target area. Finally, check the power supply to ensure it matches the rating on the unit; if it's incorrect, change it to match the unit's rating.
How to reduce excessive heat from Hatco Heater?
If your Hatco Heater is producing excessive heat, ensure the unit is installed within the specified parameters for its type and model. If it's too close to the target area, increase the mounting height. Also, verify that the power supply matches the unit's rating; correct it if it does not.
Why do the control switches burn out on my Hatco Heater?
If the control switches on your Hatco Heater are burning out, the remote control box may be too close to the heat zone. Move the remote control box away from the heat zone, ensuring the ambient temperature for the control box does not exceed 40°C (104°F). Also, ensure that you are using genuine Hatco replacement parts, as they are designed to operate safely within the intended environment. Contact an Authorized Service Agent or Hatco to replace switches with genuine Hatco parts.
What to do if Hatco Heater has heat but no lights?
If your Hatco Heater (GM5AHL model) has heat but no lights, the LED assembly might be defective, in which case you should contact an Authorized Service Agent or Hatco for assistance. Also faulty wiring could be the cause.
General| Model | GM5AH Series |
|---|---|
| Width | Varies by model (consult spec sheet) |
| Height | Varies by model (consult spec sheet) |
| Depth | Varies by model (consult spec sheet) |
| Power | Varies by model (consult spec sheet) |
| Voltage | Varies by model (consult spec sheet) |
| Amperage | Varies by model (consult spec sheet) |
| Dimensions | Varies by model (consult spec sheet) |
| Weight | Varies by model (consult spec sheet) |
| Overall Dimensions | Varies by model (consult spec sheet) |
To Next Page
