Hatco ITQ Series - Model Designation; Specifications; Plug Configurations; Electrical Rating Charts

Form No. ITQCEM1-0717
5
I T Q - x x x x - x C
Intelligent Toast-Qwik
Conveyor Toaster
Model Number
1C = Single Conveyor
2C = Dual Conveyor
MODEL DESIGNATION
Model Voltage Hertz Watts Amps Plug Configuration Shipping Weight*
ITQ-1000-1C 230 60 3600 15.7 CEE 7/7 Schuko or no plug 40 kg (89 lbs.)
ITQ-1750-2C 230 60 4960 21.6 no plug 48 kg (106 lbs.)
Plug Configuration
Some units are supplied from the factory with an electrical
cord and plug installed. Plugs are supplied according to the
application.
WARNING
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install the proper voltage and size electrical receptacle.
NOTE: Receptacle not supplied by Hatco.
WARNING
ELECTRIC SHOCK HAZARD: Units supplied without an
electrical plug require field installation of proper plug.
Plug must be properly grounded and of correct voltage,
size, and configuration for electrical specifications of unit.
Contact a qualified electrician to determine and install
proper electrical plug.
CEE 7/7 Schuko
Plug Configuration
Electrical Rating Chart
* Shipping weight includes packaging.
SPECIFICATIONS