EasyManua.ls Logo

Hatz 1D42 - Engine Starting Procedures

Hatz 1D42
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Instructions to activate the mechanical oil pres-
sure control are mentioned on the sticker placed
on the engine.
IMPORTANT !
Even with mechanical oil pressure monitoring
the oil level must be checked every 8 – 15
operating hours (Chapter 5.2.1.).
4.2. Starting the engine
Do not run the engine in closed or
badly ventilated rooms – danger of
poisoning ! Before the engine is started, al-
ways make sure that nobody is in the danger
area (moving parts on engine or machinery)
and that all safety guards are in place.
Check that the starting handle is in good condi-
tion: renew tubular grip if broken, worn drive pin
etc.
Lightly grease the sliding-contact area between
the starting handle and the guide sleeve.
14
Risk of serious injury from rotating parts.
Never put your hands in the guide sleeve of the
cranking device while the engine is running.
15
Never use any spray starting aids.
050 145 00
L3 / 250
WARNING
0000 053 755 00
0000 051 268 02
1 3 4
5
6
2
7
15s
13

Related product manuals