2L41C, 2M41, 2M41Z EPA CERTIFIED ENGINES
HATZ
105Operator’s Manual
INSTRUCTIONS ON THE INSTALLATION OF THE EXHAUST SYSTEM
Following are the instructions to properly install the exhaust system and re-
lated components consistent with the EPA emission regulation requirements.
2M41, 3M41, 4M41
Exhaust-silencers
The exhaust silencer is fitted in connection with gaskets.
Fixation is done by hexagon head screws (1) and Allen screws (3).
Dismantling:
▪ Remove in numerical sequence (1...5).
Assembly:
▪ Assemble in reverse sequence.
▪ Use anti-seize compound J as specified by HATZ.
To Next Page
Loading...
