EasyManua.ls Logo

Hatz 2M41Z - Changing Main Fuel Filter

Hatz 2M41Z
113 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2L41C, 2M41, 2M41Z Maintenance
HATZ
79Operator’s Manual
Step Activity
6 Add engine oil to the max. mark on the dipstick.
For the specification and viscosity, see chapter 4.4 Engine oil,
page 24.
The mark on the dipstick indicates whether the engine is
equipped with an oil sump or not (see chapter 4.1 Engine in-
formation and filling quantities, page 22).
7 Reinsert the dipstick.
8 Check the oil level after a short test run and correct if necessary.
9 Check the oil filter for tightness and retighten by hand if neces-
sary.
8.2.15 Change the main fuel filter
Safety notes
DANGER
Fire hazard from fuel
Leaked or spilled fuel can ignite on hot engine parts and cause
serious burn injuries.
Do not spill fuel.
No open flames when working on the fuel system.
Do not smoke.
CAUTION
Danger of injury
Repeated contact with diesel fuel can cause chapped and
cracked skin.
Wear safety gloves.
CAUTION
Danger of environmental damage from spilled fuel.
When the filter is removed, a small amount of fuel is drained as
well.
Collect any escaping fuel and dispose of it according to lo-
cal environmental regulations.

Table of Contents

Other manuals for Hatz 2M41Z

Related product manuals