Hatz 2M41Z - Page 86

Maintenance 2L41C, 2M41, 2M41Z
86
HATZ
Operator’s Manual
Procedure — Centering the pulley
Step Activity
1 Lightly secure the pulley with a cylinder screw (1) without plac-
ing the pulley fully on the centering.
2 Insert the ratchet or T-piece 1/2" with the required extension into
the square opening (2).
3 Turn the pulley until a further cylinder screw can be fitted.
4 Insert the remaining cylinder screws and tighten all screws.