Page 2
IPG-9
A. GENERAL INFORMATION
The Hauck Series IPG Gas Pilot provides a means of lighting the flame of Hauck burners and
many other industrial gas or oil burners. IPG pilots are engineered for exceptional flame stability
and long life, even under the most severe and adverse operating conditions. IPG pilots are
designed for electric spark ignition. The standard IPG Gas Pilots are suitable for firing into
neutral, negative or positive pressure applications.
The back-loaded feature offers the capability to compensate the pilot air/fuel ratio for variations
in furnace or burner pressure.
B. RECEIVING AND INSPECTION
Upon receipt, check each item on the bill of lading and/or invoice to determine that all
equipment has been received. A careful examination of all parts should be made to ascertain if
there has been any damage in shipment.
WARNING
This equipment is potentially dangerous with the possibility of serious personal injury
and property damage. Hauck Manufacturing Company recommends the use of flame
supervisory equipment and fuel safety shutoff valves. Furthermore, Hauck urges rigid
adherence to National Fire Protection Association (NFPA) standards and insurance
underwriter’s requirements. Operation and regular preventative maintenance of this
equipment should be performed only by properly trained and qualified personnel.
Annual review and upgrading of safety equipment is recommended.
IMPORTANT
If the installation is delayed and the equipment is stored outside,
provide adequate protection as dictated by climate and period of
exposure. Special care should be given to all motors and bearings, if
applicable, to protect them from rain or excessive moisture.
To Next Page
Loading...
Need help?
General
