Thank you for choosing a Harbor Freight Tools product! For future reference, please complete the owner’s
record below:
Model:___________________ Purchase Date:_________________
Save the receipt, warranty card and these instructions. It is important that you read the entire instruction sheet
to become familiar with this product before you begin using it.
Technical Specifications:
This heavy duty Trailer Cart has a large 10 cubic foot bed capacity. It has a tail gate
which is easy to lift out, and the the bed tilts with a quick release feature.
Cart Dimensions: 43” x 33” x 12”; Inside Bed Dimensions: 41” x 30” x 12”
16” Wheels with Pneumatic Tires; Pin Hitch: #5/8” Pin Hole
Trailer Cart Capacity: 600 Lbs.
Warning:
1. Always wear ANSI approved safety goggles when assembling this product and when
working with tools and equipment.
2. The Trailer Cart has a safe working capacity of 600 lbs. Never exceed this
weight capacity.
3. When unloading and loading the cart, be careful of the balance of the cart. Always
engage the tongue latch to the towing vehicle before loading the Trailer Cart. The cart will
ride best with the load centered over and in front of the axle.
4. Never allow children to play in or operate the cart. This cart is not designed for carry-
ing people or animals.
5. This Trailer Cart is not designed for use on public highways. Always use low speeds
(under 5 MPH) when performing off road hauling.
6. Before each use, check the tongue latch connection to the towing vehicle to insure safe
operation. Before each use, check the condition of pneumatic tires (recommended tire
pressure is 30 PSI).
#38897 Page 2
To Next Page
Loading...
