Haulotte Group Compact 10DX Maintenance Book

Haulotte Group Compact 10DX

194 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Maintenance book

E

NGINE

-

POWERED

SCISSOR

LIFTS

4000014930 e10 12 EN

Maintenance book

ENGINE-POWERED SCISSOR LIFTS

Compact 10DX (Compact 2668RT)

Compact 12DX (Compact 3368RT)

H12SX (HS3388RT) - H12SXL (HS3388RTXL)

H15SX (HS4388RT) - H15SXL (HS4388RTXL)

H18SX (HS5388RT) - H18SXL (HS5388RTXL)

4000014930

e10 12

Table of Contents

Other manuals for Haulotte Group Compact 10DX

Operator's Manual87 pages

Questions and Answers:

A
Alison WilliamsAug 16, 2025
Why is the platform not lifting on my Haulotte Group Compact 10DX Scissor Lifts?
- R
  Robin MartinezAug 16, 2025
  If your Haulotte Group Scissor Lifts platform doesn't lift, it could be due to several reasons. First, check if the load (personnel or material) is too heavy and reduce it if necessary. Ensure that the hydraulic oil level is sufficient and top it up if needed. Also, make sure that the tilt or slope does not exceed the authorized limit. Finally, check the outrigger cylinders and stabilize the machine correctly.
S
Stephanie AndersonAug 19, 2025
What to do if there is no movement with the selector in driving position and platform control box joystick activated in Haulotte Group Scissor Lifts?
- P
  Patricia FoxAug 19, 2025
  If your Haulotte Group Scissor Lifts experiences no movement when the selector is in driving position and the platform control box joystick is activated, the issue could stem from a faulty joystick, which would require replacement. Another potential cause is insufficient hydraulic oil, which can be resolved by topping up the oil level. Additionally, exceeding the authorized tilt or slope limits, or overloading the platform with too much weight (personnel or material) can cause this issue. In the latter case, reduce the load.
T
Tracy LawrenceAug 22, 2025
Why is the hydraulic circuit overheating in my Haulotte Group Compact 10DX?
- D
  David HerreraAug 22, 2025
  If you experience hydraulic circuit overheating in your Haulotte Group Scissor Lifts, it might be because the oil viscosity level is too high. In this case, you should drain the circuit and refill it with the recommended oil. Another possible cause is not enough hydraulic oil, so ensure that you top up the oil level.
C
Cory RossAug 25, 2025
What to do if there is no movement with the lifting selector and joystick activated in Haulotte Group Compact 10DX?
- R
  robinhillAug 26, 2025
  If your Haulotte Group Scissor Lifts experiences no movement with the lifting selector and joystick activated, the selector or joystick may be faulty, or there may not be enough hydraulic oil. Check the movement with the lower lifting selector activated and the machine stabilized. If necessary, top up the oil level.
J
Jason MartinezAug 28, 2025
Why is platform lifting and lowering jerky in Haulotte Group Compact 10DX Scissor Lifts?
- A
  Andrea JohnsonAug 28, 2025
  If the platform lifting and lowering is jerky in your Haulotte Group Scissor Lifts, it is likely due to not enough hydraulic oil. To resolve this, top up the oil level.
K
Kelsey GarciaAug 31, 2025
What to do if the platform will not lower on my Haulotte Group Compact 10DX?
- J
  jreedAug 31, 2025
  If your Haulotte Group Scissor Lifts platform will not lower, it might be because the load in the platform is too heavy (personnel or material). Reduce the load to solve this problem.
J
jefferylopezSep 3, 2025
Why does the machine race when lowering on Haulotte Group Compact 10DX?
- J
  Jose OwenSep 3, 2025
  If your Haulotte Group Scissor Lifts machine races when lowering, the balancing valve may be poorly adjusted or faulty.
D
danielleschultzSep 6, 2025
Why is the hydraulic pump making an abnormal noise in my Haulotte Group Compact 10DX?
- D
  donaldfosterSep 6, 2025
  If the hydraulic pump is making an abnormal noise in your Haulotte Group Scissor Lifts, it is likely due to not enough hydraulic oil. To resolve this, top up the oil level.
R
Ryan StantonSep 8, 2025
Why does the steering system work irregularly in Haulotte Group Compact 10DX Scissor Lifts?
- K
  Kim BrownSep 9, 2025
  If the steering system works irregularly on your Haulotte Group Scissor Lifts, it could be because the hydraulic oil temperature is too low. Perform movements without any load to heat up the oil.
K
Kim DanielsSep 12, 2025
What to do if the load calculator does not work on Haulotte Group Scissor Lifts?
- J
  Jeffrey HolmesSep 12, 2025
  If the load calculator does not work on your Haulotte Group Scissor Lifts, it is likely due to a faulty load calculator. Repair or replace the calculator to solve this issue.

Haulotte Group Compact 10DX Specifications

General

Brand	Haulotte Group
Model	Compact 10DX
Category	Scissor Lifts
Language	English

Related product manuals

Haulotte Group Compact 12DX

Preview: Haulotte Group H12SX

Haulotte Group H12SX

Haulotte Group Compact 2668RT

Haulotte Group Compact 3368RT

Haulotte Group H15SX

Haulotte Group H15SXL

Haulotte Group H18SX