To Next PageTo Next PageWhy does the steering system work irregularly in Haulotte Group Compact 3368RT Scissor Lifts?
If the steering system works irregularly on your Haulotte Group Scissor Lifts, it could be because the hydraulic oil temperature is too low. Perform movements without any load to heat up the oil.
Why is the hydraulic pump making an abnormal noise in my Haulotte Group Compact 3368RT?
If the hydraulic pump is making an abnormal noise in your Haulotte Group Scissor Lifts, it is likely due to not enough hydraulic oil. To resolve this, top up the oil level.
Why does the machine race when lowering on Haulotte Group Compact 3368RT Scissor Lifts?
If your Haulotte Group Scissor Lifts machine races when lowering, the balancing valve may be poorly adjusted or faulty.
What to do if the platform will not lower on my Haulotte Group Compact 3368RT?
If your Haulotte Group Scissor Lifts platform will not lower, it might be because the load in the platform is too heavy (personnel or material). Reduce the load to solve this problem.
Why is platform lifting and lowering jerky in Haulotte Group Compact 3368RT Scissor Lifts?
If the platform lifting and lowering is jerky in your Haulotte Group Scissor Lifts, it is likely due to not enough hydraulic oil. To resolve this, top up the oil level.
What to do if there is no movement with the lifting selector and joystick activated in Haulotte Group Compact 3368RT Scissor Lifts?
If your Haulotte Group Scissor Lifts experiences no movement with the lifting selector and joystick activated, the selector or joystick may be faulty, or there may not be enough hydraulic oil. Check the movement with the lower lifting selector activated and the machine stabilized. If necessary, top up the oil level.
Why is the hydraulic circuit overheating in my Haulotte Group Compact 3368RT Scissor Lifts?
If you experience hydraulic circuit overheating in your Haulotte Group Scissor Lifts, it might be because the oil viscosity level is too high. In this case, you should drain the circuit and refill it with the recommended oil. Another possible cause is not enough hydraulic oil, so ensure that you top up the oil level.
What to do if there is no movement with the selector in driving position and platform control box joystick activated in Haulotte Group Compact 3368RT?
If your Haulotte Group Scissor Lifts experiences no movement when the selector is in driving position and the platform control box joystick is activated, the issue could stem from a faulty joystick, which would require replacement. Another potential cause is insufficient hydraulic oil, which can be resolved by topping up the oil level. Additionally, exceeding the authorized tilt or slope limits, or overloading the platform with too much weight (personnel or material) can cause this issue. In the latter case, reduce the load.
General| Brand | Haulotte Group |
|---|---|
| Model | Compact 3368RT |
| Category | Scissor Lifts |
| Language | English |
General and specific instructions to follow before operating the machine.
Prohibitions and potential risks during machine operation.
Operator's duties regarding manual, machine condition, and safe use.
Table outlining roles in periodical machine maintenance and inspection.
General view and description of ground and platform control boxes.
Details on controls activation, platform lifting, and drive speed limitations.
Daily visual inspection and functional test requirements for safe operation.
Procedure for lowering the platform in an emergency from the ground.
