EasyManua.ls Logo

Haulotte H15 SDX User Manual

Haulotte H15 SDX
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
La Péronnière BP9 42152 L’HORME France
( 04 77 29 24 24 7 04 77 31 28 11
E.Mail: haulotte@haulotte.com Web: http://www.haulotte.com
OPERATING AND MAINTENANCE
INSTRUCTIONS
SCISSOR LIFT
H12 SD / SDX / SDE
H15 SD / SDX / SDE
H18 SDX
242 031 4260 FB Australia E 03 00

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Haulotte H15 SDX and is the answer not in the manual?

Haulotte H15 SDX Specifications

General IconGeneral
Maximum Working Height15 m
Platform Height13 m
Power SourceElectric
Drive Speed5.5 km/h
Travel Speed5.5 km/h
Platform Capacity500 kg
Overall Width1.79 m
Overall Height2.54 m
Max Capacity500 kg
Stowed Width1.79 m
Stowed Height2.54 m

Summary

General Recommendations for Safe Operation

General Warning and Operator Responsibility

Provides general safety advice for operating HAULOTTE self-propelled platforms safely and efficiently, emphasizing operator responsibility.

General Safety Instructions and Prohibitions

Details essential safety guidelines for operators, including PPE, operational limits, and conditions to avoid for safe use.

Residual Risks and Operating Scope Definition

Identifies potential risks and defines the operating scope and limitations for machine use.

Principle of Operation and Electrical Systems

Machine Operation and Safety Procedures

General Operation Instructions and Safety Devices

Provides general operating instructions and explains the machine's safety devices.

Unloading, Loading, and Driving Procedures

Details procedures for safe unloading, loading, and driving of the scissor lift platform.

Putting Machine into Service: Controls and Inspections

Guides on putting the machine into service, covering ground/platform controls and daily inspections.

Operating Instructions: Ground and Platform Use

Step-by-step instructions for starting the engine and operating the machine from ground and platform.

Maintenance and Troubleshooting Guide

Load Testing Procedures and Stability Requirements

Covers overload tests, functional tests, and stability testing requirements for safety compliance.

Troubleshooting Common System Faults

Guides users in diagnosing and resolving common faults in lift, travel, steer, and hydraulic systems.

Related product manuals