Haulotte HA16RTJ - Lifting Operation

Remove the ignition key to prevent unauthorized operation of the machine.
Storing of the machine with an obstacle under the boom structure is forbidden.
To avoid any risk of corrosion on rods of cylinders during a storage period of more than1month:
- In a normal atmospheric environment: perform a complete cycle for the cylinders
every2months while they are in storage.
- In harsh environments (high levels of salinity in the atmosphere: close to the sea, industrial
environment with chloride emissions and/or humidity >70%), we recommend applying the
following protection process:
• Wash and rinse the entire machine with plenty of clean water.
• Dry all the cylinder rods using an air gun.
• Apply a solvent-based oil leaving an oily film after evaporation of the solvent directly to all
rods left exposed when the machine is in storage position.
• Re-apply the product every month.
After washing the machine, make sure it is fully air-dry and does not contain moisture on corrosive
parts (cylinders rods for example). Do not wash electrical components with a high pressure washer.
Wipe away dirt from around electrical components with a dry cloth.
5.6 Lifting operation
During loading / unloading operation, if it becomes necessary to lift the machine using an overhead crane, it
is important to respect the following:
- Put the machine in stowed position, boom and arm fully retracted and lowered.
- Ensure the platform is empty.
- Rotate the turret and the jib to the configuration in the photos below.
- Lock the turret with turret locking pin.
- Verify that lifting accessories are in good operation and match the technical specifications listed below.
It is important that the lifting devices are attached only to the designated lifting eyes.
- Each of the slings used for lifting the machine must be adjusted to keep the machine level and to
minimize the risk of damage to the machine.
- Anchorage point for lifting are identified / labeled by the following symbol .
- ONLY trained and authorized personnel should attempt to lift the machine.
Never lift the machine with slings attached to counterweight.
HA16RTJ - HA16RTJ O - HA16RTJ PRO - HA46RTJ O - HA46RTJ PRO
D - Operation instructions
D - 18 4001260900 E 10.23 USA / GB