35
10 Cleaning
iClean the device before inial commissioning and aer each use. Cleanliness is a
mandatory requirement for hygienic dough producon.
⚠ WARNING
Danger to life from mains voltage 110 -240V ~ 50/60Hz
Electric shock
Disconnect the device from the power supply.
Clean the device only with a damp cloth.
ATTENTION
Damage caused by incorrect cleaning
Water can get into the device and damage its inner workings
Do not use a water jet or high-pressure cleaner to clean the unit.
iFor idencaon of the parts, see Tab. 3 "the scope of delivery
*
and part designa-
on
*
" on page 9, for completeness.
Disconnecng the power supply
Stop the machine.
Turn o the power switch.
Unplug the mains plug
5
.
Removing the dough hook and bowl
iYou can see how individual parts are installed and removed as illustrated instruc-
ons in the “Handling” chapter from page 14.
Fold up the bowl cover
8
.
Release the dough hook
7
by turning it clockwise and remove it from the dough
hook mounng.
Release the bowl
10
by vigorously turning it counterclockwise and remove the
bowl from the bowl mounng
11
.
Cleaning