37
11 Maintenance
⚠ WARNING
Danger to life from mains voltage 110-240V ~ 50/60Hz
Electric shock
Always disconnect the device from the power supply before commencing
maintenance work.
Only qualied specialist personnel are permied to carry out maintenance
work on electric components.
⚠ CAUTION
Danger of crushing by rotang parts
Injuries to ngers and hands
Disconnect the device from the power supply.
Do not put the unit into operaon without the guard and housing parts.
iComponent-specic grease must be used for maintenance. For suitable grease,
see chapter "Accessories".
Disconnecng the power supply
Switch o the unit.
Unplug the mains plug.
Lubricang the locking latch
If the locking system jams, grease the trap with a food compable grease.
Belt
A belt drive is maintenance-free.
Maintenance