HAUSSLER NOVA - Faults; Error Codes and Troubleshooting

39
Error codes and their meanings
1
2
4
8
32
64
128
General error
Crical overvoltage
Overvoltage
Motor control error
Motor control overtemperature
Motor jammed
Motor phase loss
Other faults
Fault Cause Soluon
The unit does not turn
on
Bowl is not installed  Install the bowl.
The lng head is not
locked completely
 Turn the dough hook a lile
unl the swivel head can be
lowered completely.
The bowl cover is open  Close the bowl cover.
The power supply is
interrupted
 Insert the mains plug.
 Check the fuses on the
installaon side.
The device is running
loudly
various causes  Inform customer support.
The dough hook is
not in the dough hook
mounng
The exible retaining
screws have moved
 Adjust the retaining screws
using a small sloed
screwdriver.
The bowl is causing
noise
The bowl is not sing
properly in the bowl
mounng
Thrust pieces are not suf-
ciently greased
 Lock the bowl rmly in a
clockwise direcon.
 Apply grease to the locking
lugs of the bayonet.
Tab. 8: Troubleshoong
Should further problems occur, please call our service team on the following num-
ber: +49 73 71/93 77-180
Faults