Hautec HFB 6101 - For Your Safety

To Next Page

To Previous Page

Manual HFB 6101

Hautec GmbH An der Molkerei 9 D-47551 Bedburg-Hau/ Hasselt Tel.: +49(0)2821-7612-3 Fax: +49(0)2821-7612-76

23.05.12 16:56 Page 3 of 36

We 09:36

Overview

FuncEsc

1 39.5 °C

2 33.4 °C

Normal heating mode

Normal loading mode

20.2 °C

43% RF

23.7 °C

50.8 °C

Dear custumer,

This is your manual for the HFB 6101 remote control, a high quality pro-

duct from Hautec. Thank your condence in Hautec.

This manual will give you basic information how to use the remote control

HFB 6101. The SC 6001 is built into the heat pump, this is operated by

this HFB 6101 remote control. All errors and informations from the HSC

6001 heat pump controller are displayed on this remote control HFB 6101

remote control. Please read the following instructions carefully.

For your safety

All works on the controller and on the heating system (installation, mainte-

nance etc.) must be carried out by a certied technician.

TIP: The controller is pre-programmed. If the timer and temperature valu-

es correspond to the requirements of your installation, then it is not neces-

sary to make a new setting.