5
Fan reduces speed level at xed interval
4. If fan is running at SPEED LEVEL 5 than speed will reduce one level at 90 minutes interval till 1st speed and
continuously run at 1st speed.
5. If fan is running at SPEED LEVEL 4 than speed will reduce one level at 120 minutes interval till 1st speed and
continuously run at 1st speed.
6. If fan is running at SPEED LEVEL 3 than speed will reduce one level at 180 minutes interval till 1st speed and
continuously run at 1st speed.
7. If fan is running at SPEED LEVEL 2 than speed will reduce one level at 360 minutes interval till 1st speed and
continuously run at 1st speed.
• Boost mode Fan speed will increase beyond 5th speed level for extra comfort as per customer need
8. Timer : Press the “Timer” Button to select desired timer setting and Selected LED Will illuminate for 5 seconds.
• 2 h: to set timer for 2 hours
• 4 h: to set timer for 4 hours
• 6 h: to set timer for 6 hours
• 8 h: to set timer for 8 hours
Note: Timer feature will be disable once main power is off.
9. Light Colour Control: Warm White/ Neutral White/ Cool White
• Press button to change colour of light
10. Light Intensity Control: 5 Intensity level from Dimming to Smooth Glowing
• Press button to change intensity of light
To decrease intensity of light to increase intensity of light
11. Reset : To enable/disable the Wi-Fi
• Press button for 5 seconds to enable/disable the Wi-Fi broadcasting in PCB
Reset
NOTE:
1. Use AAA Battery (2 N) available in box. In case battery is drained , use AAA Battery (2 N) of preferred brand
2. PCB failure in the circuit due to external regulator will not be covered under warranty.
3. Wall Mount Regulator should be disconnected for fan safety and better performance.
4. Minor reverse rotation/lag when the fan starts, is a normal phenomenon in BLDC Fans, it’s not a defect.
APP INSTALLATION FOR AndroidTM and iOS
Before setting up app, ensure the following points:
1. Internet connection is necessary to register on the App. A stationary Wi-Fi network (router) is also required for
connecting/pairing devices.
2. Fan should be installed according to the instructions and safety guidelines mentioned in the Manual.
3. Havells Sync App will only work for the following mobile OS versions;
To Next Page
Loading...