10
3.9 Restore factory settings
If the earbuds cannot pair or disconnect frequently,
please restore the factory settings.
Take out both earbuds from the charging case.
Click the left earbud’s MFB twice, when one earbud
indicator starts flashing alternately with white and
orange and the other earbud indicator is turned
off, the reset is completed.
3.10 Charging
Case
Charge the case using the micro USB cable
connected to a computer or wall charger. The
indicator in the charging case flashes white when
charging and turns to be steady white when fully
charged. Charging time is approximately 2 hours.
Earbuds
Put the earbuds back into the charging case for
charging. While charging, the indicator light turns
to white. After full charge, the white light turns off.
To Next Page
Loading...
