9
3.8 Mono mode
Take out any earbuds as a unilateral Bluetooth
earbud.
Note: Single channel mode only needs to remove
one of earbuds from the charging box; if two
earbuds are removed before connection, the
earbud will be used in TWS mode by default, and
the TWS connection will be automatically realized.
1. Take out an earbud from the charging case, the
earbud turns on automatically and reconnects
to previously connected devices.
2. Switch from one earbud to the other when
playing music, taking out the other earbud
from the charging case and these two earbuds
will connect automatically. Both earbuds will
play music, then put the earbud, which is not
needed anymore, into the charging case and
the switching process completes.
Note: Call mode is applicable.
3. Please refer to the TWS mode for more
functions.
To Next Page
Loading...
