6
3 Functions
3.1 Power on, Bluetooth connection
Firstly, confirm that your mobile phone has built-in
Bluetooth.
1. Power on
Method 1: Remove earbuds from the charging
case.
Method 2: If earbuds are power off outside the
case, long press the MFB for 3 seconds on both
sides to turn then on. When one earbud
indicator starts flashing alternately with orange
and white and the other earbuds indicator is
off, the product is ready for use.
2. Turn on Bluetooth on your device and select
“Havit TW935” referring to your phone
instructions.
3. Pairing mode can just last 180 seconds. If you
miss the pairing time, you need to restart the
device and operate follow the procedural steps
mentioned above.
To Next Page
Loading...
