EasyManua.ls Logo

Hawk X Pro Series - Silent Arming;Disarming; Arming in Transport Mode; Energy Saving Mode

Hawk X Pro Series
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SILENT ARMING/DISARMING
Press the button, the lights will flash once and the system will be armed. If the motion
detection sensor is triggered in silent arming mode for first time, indicator lights flashes
slowly. System will revert to normal arming mode automatically, when shaken again.
To disarm in silent arming mode press the
button. Press the button to quit silent
arming and back to normal arming mode.
ARMING IN TRANSPORT MODE (Temporary Sensor By pass)
A
PERMEANT MUTE ARMING AND DISARMING
Press + buttons simultaneously, indicator lights flash 2 times for mute mode. To
disable permeant mute arming and disarming follow the above procedure, indicator lights
flash 2 times, siren sound 2 times.
fter pressing
button to arm the system, press again once within 3 seconds,
indicator light flash once, indicating shock sensor and auxiliary sensor are both bypassed;
now the motorbike can be transported freely.
To turn on the shock sensor and auxiliary sensor, press
again, the bike will be back to
normal arming status.
ENERGY SAVING MODE:
The HAWK incorporates Energy Saving Mode in order to conserve motorcycle battery charge.
Energy Saving Mode as follows:
Automatically
When alarm is armed after 2 days the alarm will enter automatically into sleep mode. The
remote control fobs will not work or LED will not flash until system is awakened (see Exit
Sleep Mode).
Manually
To cancel energy saving mode:
Disarm the alarm, press and hold button for 2 seconds. Siren will chirp once. Continue
to hold Siren will chirp once and indicator will flash once.
To enable energy saving mode:
Disarm the alarm press and hold button for 2 seconds. Siren will chirp twice and
indicator will flash twice.
Alarm Reaction in sleep mode
Turn ignition ON, the system will be awaken and alarm will sound constantly
until the ignition is switch OFF. System will enter into normal mode after 5 seconds.
Shock sensor activated, alarm will activate for 30 seconds (shock sensor activated
1 stage, system will chirp 5 times and indicator light will flash 5 times). The
st
system will enter into normal mode after 5 seconds after alarm reaction finished.
2

Related product manuals