Hawking HWBA54G User Manual

HWBA54G – Wireless-G Access Point / Ethernet Bridge
12
Enter the default user name and password, then press OK button
directly.
4. You can start configuring the Access Point once you enter the
management screen.
From a Wireless computer
1. Make sure your wireless computer is in the same subnet with the
Access Point. Please refer to the step 1 above for configuring the IP
Address and Sub Mask of the wireless computer.
2. Connect to the Access Point.
The Access Point’s default ESSID is “hawkingap” and the WEP
Encryption function is disabled. Make sure your wireless computer is
using the same ESSID as the Access Point and associate your wireless
computer to the Access Point.
3. Enter 192.168.1.240 from a Web Browser to get into the Access Point’s
configuration tool.
4. Enter the user name and password and then press the OK button and
you will be able to configure the Access Point.

Hawking HWBA54G Specifications

General

Brand	Hawking
Model	HWBA54G
Category	Wireless Access Point
Language	English