2
F−96498
LIMITED WARRANTY
Hayter Limited warrants to the original user / purchaser that this unit shall be free from
defects in material and workmanship under normal use and service for a period of two years
from the date of purchase. To qualify for the full benefit of the warranty, the warranty
registration card must be returned within 60 days of purchase. This warranty does not cover
engines or wearing parts i.e. cutterbars, wheels and tyres. If you have any doubt, consult
a Hayter authorised dealer for clarification. Subject to the conditions and exclusions noted
in this limited warranty, we shall at our option, repair or replace any warranted part during
the applicable period. Engine manufacturers furnish their own warranties and provide
services through their authorised network. If you experience any difficulty, please contact
a Hayter authorised dealer.
To qualify for the second twelve month period of the above two year limited warranty, the
machine must be serviced by a Hayter authorised dealer. This chargeable service should
be carried out within 14 months of purchase and be in accordance with the
recommendations for service determined by Hayter.
This warranty does not apply to any unit that has been tampered with, altered, misused,
abused or used for hire and will become invalid if non genuine Hayter parts are fitted. This
warranty does not cover minor mechanical adjustments unless they are due to defective
materials or workmanship. Consult the owners handbook or a Hayter authorised dealer for
assistance when making these adjustments.
A warranty period of 90 days applies to machines used for commercial purposes.
To make a warranty claim, return the unit to a Hayter authorised dealer along with proof of
purchase indicating the machine serial number and purchase date. Subject to the conditions
and exclusions in this limited warranty, the authorised dealer will, at our option, repair or
replace any warranted part within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights
to which you may be entitled and your statutory rights are not affected by this warranty. If
you need additional information concerning this written warranty, or assistance in obtaining
services, please write to: HAYTER LIMITED, Service Department, Spellbrook, Bishop’s
Stortford, Herts. CM23 4BU.
Details of your local Hayter authorised dealer are contained in Yellow Pages or contact:
Freephone 0800 616298.
Declared vibration emission values in
accordance with Directive 89/392/EEC.
Vibration Emission 4.87
m/s
2
Values determined at the handle when the
machine was operated stationary on a grass
covered surface at 3200 min−1.
Declared airborne noise emissions in
accordance with Directive 89/392/EEC.
Sound Power Level 99
dB(A)
Sound Pressure Levels
at operator ears 86.9
dB(A) left
87.3
dB(A) right
Values determined according to the
specifications of ISO 5395/5.
MADE IN USA BY MURRAY INC.,
MCKENZIE, TENNESSEE,
FOR
1996
To Next Page
Loading...