Need help?Do you have a question about the Hayward HCF363 and is the answer not in the manual?
General| Brand | Hayward |
|---|---|
| Model | HCF363 |
| Category | Swimming Pool Filter |
| Language | English |
Filters are important accessories for pool water treatment, eliminating suspended particles for clarity.
Hayward filters are corrosion-proof, made of fiberglass and resins, with PVC/ABS internal fittings, rated for 50 PSI.
Guidance on selecting filters based on turnover time and adding filters for increased area requirements.
Provides filter dimensions (A-E) and specifies the required #20 Silica Sand for optimal filtration.
General advice for filter installation, including site ventilation, drainage, and handling precautions.
Steps for moving the filter into position, ensuring it's level, and checking internal components.
Instructions for assembling and installing the pressure gauge, tee, and vent valve.
Procedure for safely removing the filter's manway cover, including turning off power and setting valves.
Steps for correctly reinstalling the manway cover, ensuring proper seal and alignment.
Importance of testing the system with water only to check for leaks before adding sand.
Procedure for adding the specified #20 silica sand and preparing the filter for operation.
Details on the filtration process, recommended valves, and initial startup pressure.
Instructions on how to perform the backwash cycle for filter maintenance.
To Next Page