Need help?Do you have a question about the Hayward HeatPro HP21104T and is the answer not in the manual?
General| Model Number | HP21104T |
|---|---|
| Type | Heat Pump |
| Heating Capacity | 110, 000 BTU/hr |
| Phase | 1 |
| Hertz | 60 Hz |
| Compressor Type | Scroll |
| Refrigerant | R410A |
| Weight | 250 lbs |
| Warranty | 2 years |
| Max Water Temp | 104°F |
| Voltage | 208/230V |
Indicates a low pressure condition, often due to refrigerant loss.
Steps to diagnose and resolve the LP error code.
Indicates a high pressure condition, often due to restricted water flow.
Steps to diagnose and resolve the HP/HI error code.
Indicates an open water pressure switch or low water flow.
Steps to diagnose and resolve the Flo/PS error code.
Indicates no low voltage to the control, often a tripped breaker.
Steps to diagnose and resolve a blank display error.
Indicates the heat pump is in defrost mode.
Steps to diagnose and resolve the FS/deF error code.
To Next Page