Need help?Do you have a question about the Hayward HP65B and is the answer not in the manual?
General| Model | HP65B |
|---|---|
| Category | Heat Pump |
| Heating Capacity | 65, 000 BTU/hr |
| Voltage | 230V |
| Phase | Single |
| Hertz | 60Hz |
| Amperage | 30A |
| COP (Coefficient of Performance) | 5.0 |
| Refrigerant Type | R410A |
| Compressor Type | Scroll |
| Sound Level | 55 dB |
Demonstration diagram for water piping connections to the heat pump, including valves and filter.
Diagram illustrating the electrical connections for the heat pump, from power supply to terminal board.
Instructions for proper electrical connections, code compliance, and outdoor installation requirements.
Detailed guidance on wiring the heat pump, including grounding, bonding, and protection devices.
Explanation of the unit's display indicators for time and pool water temperature.
Instructions on how to set and adjust the desired water temperature using the controller.
Guide for setting the clock and adjusting time parameters on the controller.
Detailed steps for setting the timer to turn the heat pump on and off automatically.
Instructions on how to cancel the programmed timer functions for the unit.
Pre-use checks including installation, wiring, power switch, temperature settings, and air inlets/outlets.
Steps for conducting a trial run, emphasizing pump operation sequence and safety checks.
Important considerations for proper operation, placement, and avoiding damage to the unit.
Crucial safety measures regarding power supply, lightning, and unit protection.
Lists common operational faults, their potential reasons, and recommended solutions.
Illustrated view of the heat pump components with a detailed parts list for HP50B and HP65B models.
To Next Page