Hayward NAVIGATOR POOLVAC V-Flex - User Manual

177 pages

Go to English

Save Page as PDF

To Next Page

NAVIGATOR

- POOLVAC V-Flex

Guide de l’utilisateur

Owner’s manual

Manual del usuario

Manual do utilizador

Anwenderhandbuch

Gebruikershandleiding

Manuale per l’uso

HAYWARD POOL EUROPE - 1070 Allée des Chênes

CS 20054 Saint Vulbas - 01154 Lagnieu Cedex - France

ISM0925E - RevA

Questions and Answers

S
Scott PhillipsAug 4, 2025
Why is my Hayward NAVIGATOR POOLVAC V-Flex not moving forward?
- S
  syangAug 4, 2025
  The Hayward Swimming Pool Vacuum might not be moving forward due to several reasons. It could be due to a lack of or improper water flow through the cleaner, in which case you should check the water flow with the Flow Gauge and adjust it. Another reason could be a blockage in the cleaner throat, so clear any blockage that you find. Also, check the shoes and wings; if they are worn, replace them. Finally, ensure that you are using the proper cleaner model for your application; if not, use an adaptation kit.
M
Mr. Garrett PayneAug 20, 2025
What to do if my Hayward NAVIGATOR POOLVAC V-Flex Swimming Pool Vacuum fails to climb vertical walls?
- I
  Isabella BrownAug 20, 2025
  If your Hayward Swimming Pool Vacuum is failing to climb vertical walls, there are several potential causes. First, ensure you are using the proper shoes for your pool type by using an adaptation kit. Check the water flow with the Flow Gauge and adjust as needed. Inspect the cleaner throat for any blockages and clear them. Replace worn shoes or wings if necessary. Ensure the hose isn't too short by installing additional hose sections. Adjust the rear flap tension to position III. Also, check that the water flow isn't too high; if it is, reduce it until proper operation is achieved.

Summary

SAFETY WARNINGS

CARTON CONTENTS

PREPARING THE POOL

Filter Preparation

Instructions for cleaning or backwashing the pool filter prior to installation.

POOLVAC V-FLEX SETTINGS

Setting for Concrete Pools

Adjusting shoes and throat plate for concrete pool installation.

NAVIGATOR V-FLEX SETTINGS

Setting for Vinyl & Fiberglass Pools

Adjusting shoes and throat plate for vinyl/fiberglass pool installation.

INSTALLATION

Sizing Suction Hose

Instructions on connecting hose sections to achieve proper length and prevent leaks.

Hose Length and Flow Gauge

Determining correct hose length and using the flow gauge for setup.

Connecting to Pool System

Connecting the cleaner hose to the skimmer or Vac Lock.

Water Flow Adjustment

Checking and adjusting water flow using the flow gauge.

Adjusting High Water Flow

Troubleshooting high water flow and installing the regulator valve.

Adjusting Low Water Flow

Troubleshooting low water flow and understanding system limitations.

Submerging and Priming

Submerging the cleaner to remove air and prime the hose.

FINE ADJUSTMENTS

Sticking on Steps;Obstacles

Adjusting rear flapper for cleaners sticking on steps or obstructions.

Wall Climbing Behavior

Understanding cleaner behavior on walls and steering limitations.

IMPORTANT TIPS

Hose Storage and Parts

Guidance on proper hose storage and using genuine parts.

Disconnecting Cleaner Hose

Procedure for disconnecting the leader hose from the cleaner when not in use.

MAINTENANCE TIPS

Shoe and Wing Wear

Inspecting shoes and wings for wear and identifying replacement needs.

Shoe Replacement Procedure

Step-by-step guide for replacing the cleaner's shoes.

Wing Replacement Procedure

Step-by-step guide for replacing the cleaner's wings.

Turbine Access and Inspection

How to access and inspect the cleaner's internal turbine.

TROUBLESHOOTING

Slow or No Forward Movement

Diagnosing and resolving issues causing lack of forward movement.

Failure to Climb Vertical Walls

Addressing problems with the cleaner not climbing pool walls.

Cleaner Head Floating Issues

Troubleshooting when the cleaner head floats instead of staying submerged.

WARRANTY

Hayward NAVIGATOR POOLVAC V-Flex Specifications

General

Suitable for	In-Ground Pools
Installation	No tools required
Hose Diameter	1.5 inches
Cleaning Cycle	2-3 hours
Drive System	Turbine
Cleaning Area	Pool Floor and Walls
Debris Type	Small to medium-sized debris
Compatibility	Works with most pool pumps
Features	V-Flex Technology
Type	Suction Pool Cleaner