To Next PageTo Next Page
Need help?Do you have a question about the Hayward Salt & Swim 2.0 and is the answer not in the manual?
General| Brand | Hayward |
|---|---|
| Model | Salt & Swim 2.0 |
| Category | Water Filtration Systems |
| Language | English |
Electrical safety precautions and intended use of the equipment in swimming pools only.
Instructions for disconnection, qualified electricians, and chemical handling during maintenance.
Explains the salt water electrolysis system for pool sanitization and chlorine production.
Details the physical dimensions, connections, and LED status indicators of the unit.
Covers electricity consumption and recommended circuit breaker for installation.
Step-by-step guide for mounting the unit on the wall using provided hardware.
Instructions for installing the cell vertically, on a by-pass, and connecting the gas detector.
Cautionary note about careful sensor connection to prevent equipment damage.
Explanation of LED indicators for production and how to adjust output using '+' and '-' buttons.
Procedure to enter the boost menu, adjust production, and its 24h duration.
Explains yellow LEDs for low production and lists potential causes like salt, scale, or temperature.
Describes flashing orange LEDs indicating no water flow and checks required.
Method to enter a menu for reducing production using buttons, applied to configured settings.
Steps to enter the menu and select positions for gas sensor and flow switch functionality.
