Hayward S244SV - User Manual

IS244SV1 Rev A
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS 1
ProSeries
™
HIGH RATE
SAND FILTERS
Owner’s Manual
MODEL S244SV
IMPORTANT SAFETY INSTRUCTIONS
Basic safety precautions s
h
ou
ld
a
l
ways
b
e fo
ll
owe
d
, inc
l
u
d
ing t
h
e fo
ll
owing: Fai
l
ure to fo
ll
ow instructions
can cause severe injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for
one of the following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property
damage and if ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or property
damage and if ignored presents a potential hazard. It can also make consumers aware of actions that are
unpredictable and unsafe.
The NOTICE label indicates special instructions that are important but not related to hazards.
Hayward Pool Products
620 Division Street, Elizabeth, NJ 07207
Phone: (908) 355-7995
www.hayward.com
Contents
Product & System Warnings………2
How It Works……….…………..…….…4
Installation……….………………………4
Initial Start-Up of Filter………….…..5
Filter Control Valve Functions…...5
Winterizing…………………………..…..5
Replacement Parts……………………6
Warranty….…………………………….….7
Registration …………………….…….…8

Summary

Important Safety Instructions

Suction Entrapment Hazards and Precautions

Suction Entrapment Hazard

Details risks and precautions related to suction entrapment in pool filters.

Hazardous Pressure and Separation Risks

Covers warnings about system pressure and component separation hazards.

Electrical Safety and Hyperthermia Warnings

Electrical Shock and Bonding Hazards

Addresses risks of electric shock, grounding, and bonding requirements.

Hyperthermia and Hot Tub Safety

Provides safety rules for hot tub use to prevent hyperthermia.

Filter Operation and Maintenance

Installation

Provides step-by-step instructions for filter system installation.

Loading Sand Media

Filter System Procedures

Initial Start-Up of Filter

Details the necessary steps for the first time operation of the filter.

Filter Control Valve Functions

Hayward S244SV Specifications

General

Model	S244SV
Type	Sand Filter
Tank Diameter	24 inches
Flow Rate	62 GPM
Working Pressure	50 PSI
Inlet/Outlet Connection	1.5 inches
Valve Type	Multiport