Hayward SandMaster SM1700T Series User Manual

SAVE THIS INSTRUCTION MANUAL
ISSM1700T
Rev. F
Basic safety precautions should always be followed, including the following: Failure to follow instructions can cause severe
injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for one of the
following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property damage and if
ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or property damage
and if ignored presents a potential hazard. It can also make consumers aware of actions that are unpredictable and unsafe.
The NOTICE label indicates special instructions that are important but not related to hazards.
Pomona, CA Clemmons, NC Nashville, TN
WWW.HAYWARDPOOL.COM
Use only High Rate Sand No. 20 Silica Sand (.45mm - .55mm)
SERIES:
SM1700T
SM1900T
SM2300T
SM1710SHG
SM1915SHG
SM2315SHG
HIGH-RATE SAND
FILTER
OWNER’S MANUAL
INSTALLATION, OPERATION & PARTS

Hayward SandMaster SM1700T Series Specifications

General

Model	SM1700T Series
Type	Sand Filter
Sand Capacity	300 lbs
Operating Pressure	50 PSI
Inlet/Outlet Size	1.5 inches
Drain Connection	1.5 inches
Warranty	1 Year
Voltage	115/230V
Valve Type	Multiport

Summary

Sand Master Filter Owner's Manual

Product Overview and Series

Introduces the Sand Master high-rate sand filter and lists available series models.

Critical Safety Warnings and Entrapment Hazards

Suction Entrapment Hazards Explained

Details risks of hair, limb, body, evisceration, and mechanical entrapment.

Preventing Entrapment and Operational Safety

Guidelines to minimize entrapment risks and ensure safe operation and electrical safety.

Filter Operation and Installation

How the Sand Master Filter Works

Explains the filtration process, including backwashing and rinsing cycles.

Installation Steps and Sand Loading

Instructions for installing the filter, including component assembly and sand media loading.

Filter Start-Up, Functions, and Winterizing

Initial Filter Start-Up Procedure

Step-by-step guide for initial filter operation and pressure checks.

Filter Control Valve Modes

Description of different valve positions like Filter, Rinse, Waste, Recirculate, Closed.

Winterizing and Service Information

Procedures for winterizing the filter and information on service and repairs.

Specifications and Parts Identification

Filter Model Specifications

Technical specifications for different Sand Master filter models.

Parts Diagram and Reference Numbers

Visual diagram and list of all filter components with reference numbers.

System Flow Rates, Troubleshooting, and Chemistry

Recommended System Flow Rates

Table showing maximum flow rates based on pipe size for optimal performance.

Problem Solving and Pool Chemistry

Guidance for common issues and recommended pool water chemistry levels.

Product Warranty and Registration

Limited Warranty Terms

Details the warranty coverage, duration, and limitations for the filter.

Warranty Registration Card and Online Process

Instructions for completing and submitting the warranty registration.