Hayward SP1540C User Manual

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS 1
PowerFlo LX
™
/ PowerFlo II
™
/ EP
Pump Series
Owner’s Manual
INSTALLATION, OPERATION, & PARTS
IMPORTANT SAFETY INSTRUCTIONS
Hayward Pool Products
620 Division Street, Elizabeth, NJ 07207
Phone: (908) 355-7995
www.haywardnet.com
Contents
Product Warnings……….………2
Installation……….……………..…4
Start-Up & Operation…….…….6
Shaft Seal Replacement……….7
Troubleshooting…………………..8
Replacement Parts………..….…10
Warranty …………………………..…11
Registration………………………….12
ISPFSERIES Rev G
Basic safety precautions s
h
ou
ld
a
l
ways
b
e fo
ll
owe
d
, inc
l
u
d
ing t
h
e fo
ll
owing: Fai
l
ure to fo
ll
ow instructions can
cause severe injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for
one of the following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property
damage and if ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or property
damage and if ignored presents a potential hazard. It can also make consumers aware of actions that are
unpredictable and unsafe.
The NOTICE label indicates special instructions that are important but not related to hazards.

Hayward SP1540C Specifications

General

Model	SP1540C
Horsepower	1.5 HP
Voltage	115/230V
Port Size	1.5 inches
Speed	Single Speed
Discharge Size	1.5 inches
Suction Size	1.5 inches
Warranty	1 Year
Type	Above Ground Pool Pump
Material	Thermoplastic

Summary

Important Safety Instructions

Suction Entrapment Hazards

Explains hazards from damaged suction outlet covers leading to injury or death.

Reducing Entrapment Hazards

Provides guidelines to minimize suction entrapment risks, including outlet placement and quantity.

Separation Hazard Warnings

Warns about violent separation of pump/filter components if not properly secured.

Electrical Shock and Fire Hazards

Emphasizes dangers of electric shock, fire, and need for proper grounding and GFCI.

Installation Instructions

Plumbing

Electrical Requirements

Details on wiring, voltage, and GFCI protection for the pump.

Grounding and Bonding

Explains the critical steps for grounding and bonding the pump for safety.

Start-Up and Operation

Prior to Start-Up

Priming the Pump

Shaft Seal Change Instructions

Seal Replacement Procedure

Troubleshooting

Motor Issues

Pump Priming Problems

Low Flow Conditions

Replacement Parts

Parts Diagram and Listing