Hayward Super Pump SP2670007X10 User Manual

IS26700T Rev-A
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS 1
Super Pump
®
700 Series
Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
Basic safety precautions s
h
ou
ld
a
l
ways
b
e fo
ll
owe
d
, inc
l
u
d
ing t
h
e fo
ll
owing: Fai
l
ure to fo
ll
ow instructions
can cause severe injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for
one of the following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property
damage and if ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or
property damage and if ignored presents a potential hazard. It can also make consumers aware of
actions that are unpredictable and unsafe.
The NOTICE label indicates special instructions that are important but not related to hazards.
Hayward Pool Products
620 Division Street, Elizabeth, NJ 07207
Phone: (908) 355-7995
www.hayward.com
Contents
Product Specific Warnings………2
Introduction……….………………..…4
Installation……….……………..….….7
Shaft Seal Replacement..………..8
Replacement Parts………….……..10
Troubleshooting………….…..…….11
Warranty…………………………………13
Registration ……………………..……15

Hayward Super Pump SP2670007X10 Specifications

General

Brand	Hayward
Model	Super Pump SP2670007X10
Category	Water Pump
Language	English

Summary

Important Safety Instructions

Suction Entrapment Hazard Prevention

Reducing Entrapment Risks

Specific Entrapment Warnings

Electrical and Health Safety

Electric Shock Prevention and Grounding

Covers wiring, grounding, bonding, GFCI requirements, and general electrical shock hazards.

Hyperthermia Risk and Hot Tub Safety Rules

Safety rules for hot tubs to prevent hyperthermia, including temperature limits and user precautions.

Installation Guidelines

Installation Details

Pump Mounting and Pipe Sizing

Electrical Requirements for Installation

Start-Up and Operation Procedures

Priming the Pump Safely

Step-by-step guide for safely priming the pump, including necessary precautions.

Storage and Winterization

Preparing for Storage or Winter

Instructions for draining the pump, protecting it from freezing, and proper storage methods.

Shaft Seal Replacement Guide

Safety and Component Removal

Seal Installation and Component Reassembly

Replacement Parts Identification

Parts Diagram and Listing

Visual diagram and detailed list of all replacement parts with model numbers.

Troubleshooting Common Issues

Motor Operation and Priming Problems

Diagnosing and resolving issues with motor startup, shutdown, humming, and pump priming.

Troubleshooting Common Issues

Low Flow and Noisy Pump Solutions

Identifying and fixing causes of reduced water flow and unusual pump noises.

Hayward® Pool Products Limited Warranty

Warranty Terms and Coverage

Details on warranty coverage, exclusions, limitations, and obtaining service.