SPECIFICATIONS
Capacity 1000lb
Width 680mm
Minimum Height 175mm
Maximum Height 750mm
Air Inlet Fitting 1/4inch NPT
Air Pressure 120-200PSI
ASSEMBLY
Unpack the lift and check contents with list below. Should there be any damaged or
missing parts, contact your
supplier immediately.
Packing List
·Main Assembly
·Sliding Plate
·Leading Plate
·Vice
·Lift Foot Pedal
·Release Foot Pedal
·Locking Bar
·Bolts, Washers, Nuts, Cotter Pins
ASSEMBLY
Place the sliding plate(36) to the platform(35) to cover the rear wheel removal aperture.
Attach leading plate(37) to end of platform using washers(23) and R-pins(04).
Fit the front wheel vice assembly(34) to the front of the platform using bolts(33),
washers(23) and nuts(30).
Fit the baffle plate (32) using bolts (33), washers (23) and nuts (30).
Fit the lift foot pedal(11) to the pump piston spindle(09)and fit the release foot pedal(10) to
the release valve spindle(05).
To Next Page
Loading...