6 Web browser interface
144 a4275-8.0 enHBM: public CX23-R and EX23-R
Live updates
The live updates settings define the default behavior of new test setups. For existing
setups or to override the defaults, change the settings in Test setup.
Live updates refresh rate: Specify the rate that live data refreshes on the
hardware and input channel pages when live updates are running. A value of zero
causes no updates to take place.
Live updates always on: Select this option to automatically start live updates
when the test setup is saved. Live updates can be stopped and started manually
at any time when a test is not running. If not selected, live updates must be started
manually.
Include resampled message channels: Select this option to show live updates
for resampled channels such as CAN, GPS and system channels.
Include computed channels: Select this option to show live updates for
computed channels.
Confirmations
The default for all actions in the list is to show a confirmation dialog. Selecting the
Reset button will revert back to the default state of showing a confirmation dialog.
Test configuration
Delete setup
Remove channel
Delete DataMode
Export setup with changes
Export setup with errors
Copy/Paste tip
Equivalent strain warning
System configuration
Delete database
Delete user
Delete profile
Delete network
Delete mail server
Delete FTP server
Set time using PC
Set time using GPS
Miscellaneous
Purge logs
Abort setup task for another session
Delete displays view
Header collect change
6.6 Changing user password
To change the current user password, select Change password from User options.
To Next Page
Loading...
Need help?
General
