Need help?Do you have a question about the HBM Spider8 and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Sampling Rate per Channel | Up to 19.2 kHz |
| Interfaces | Ethernet |
| Operating Temperature | +50 °C |
| Frequency Range | DC |
| Sensitivity | Configurable depending on sensor type |
| Output | Digital |
| Resolution | 24-bit |
Details on the components of the Spider8 documentation.
Enumerates all items included in the Spider8 package.
Explains the Spider8 product range and its capabilities.
Describes the various ports and connectors on the device's rear panel.
Outlines the available communication interfaces for PC connectivity.
Explains the function of the device's front panel controls and indicators.
Steps to prepare the measurement chain for use.
Guide on how to physically install expansion modules into the Spider8.
Procedure for powering on the Spider8 device.
Instructions for installing the necessary software on the PC.
Addresses EMC protection for measurement signals and cables.
Details on how to connect the external power supply to the device.
Guide to connecting various types of transducers to different modules.
Instructions for establishing communication between the Spider8 and a PC.
Procedures for linking multiple Spider8 units together for expanded channels.
Steps to connect a printer for outputting measurement data.
Overview of the software used for device configuration and operation.
Describes the initial dialog box for setting up the Spider8.
Explains the various elements and functions within the setup software interface.
Instructions on how to select and group channels for simultaneous configuration.
Details on configuring individual channel parameters and transducer types.
Covers device-wide settings like sampling rate and filters.
To Next Page
