Need help?Do you have a question about the HBM DMP41 and is the answer not in the manual?
General| Brand | HBM |
|---|---|
| Model | DMP41 |
| Category | Measuring Instruments |
| Language | English |
Defines the purpose and scope of use for the DMP41 precision measuring instrument.
Highlights risks associated with improper installation and operation by untrained personnel.
Specifies environmental and installation requirements for safe operation, like temperature and moisture.
Outlines cases where product protection is affected and liability shifts to the operator.
Provides essential safety precautions for operation, including electrical safety and cable handling.
Details EMC testing and requirements, including emission and immunity standards.
Prohibits unauthorized modifications and specifies rules for repairs and module exchanges.
Describes isolation requirements for measuring circuits and interface ports.
Defines the necessary qualifications and responsibilities for operating and maintaining the DMP41.
Explains general warning symbols and the importance of following manual instructions.
Explains the CE mark and its significance for product compliance.
Covers proper disposal of electronic waste and environmental protection symbols.
Details product compliance with hazardous substance limits and recyclability.
Provides essential details about the manual, its contents, and how to navigate it.
Explains symbols and text conventions used in the manual for clarity and safety.
Lists the included items and accessories for the DMP41.
Describes the physical appearance and available enclosure versions of the DMP41.
Explains the basic working method of the DMP41 and its measurement capabilities.
Outlines the necessary steps for unpacking and connecting the DMP41.
Details how to connect the DMP41 to the mains power supply, including fuse and grounding.
Explains how to connect transducers to the DMP41, including socket usage.
Describes the four digital inputs and four digital outputs and their isolation.
Explains how to connect the DMP41 to a PC using Ethernet or USB serial adapter.
Explains how to synchronize multiple DMP41 units for accurate measurements.
Step-by-step guide for powering on the DMP41 and initial boot process.
Instructions for installing the DMP41 client software on a PC.
Key considerations before starting measurements, including synchronization.
Identifies and describes all physical control elements on the DMP41 front panel.
Details the functions of keys F1-F4 when the DMP41 is in measuring mode.
Details the functions of keys F1-F4 when the DMP41 is in setting mode.
Provides an overview of the DMP41's touchscreen interface and display modes.
Introduces essential settings for configuring measurement channels and device parameters.
Details how to set up measurement channels, including range and excitation voltage.
Covers device-specific settings like password, name, brightness, and factory defaults.
Details how to configure network interfaces like Ethernet and RS232.
Guides the user through updating the DMP41's firmware and operating software.
Provides a step-by-step example of configuring the DMP41 for a specific application.
Explains how to access and interpret channel status information and error messages.
Provides contact details for HBM technical support via email and phone.
Guides users to the HBM website for obtaining the latest software and firmware.
To Next Page
