Need help?Do you have a question about the HBM MP60 and is the answer not in the manual?
General| Accuracy class | 0.1 |
|---|---|
| Measuring range | 0 ... 60 MPa |
| Measurement Range | 0 ... 60 MPa |
| Supply voltage | 18 ... 30 V DC |
| Output signal | 4 ... 20 mA |
| Interface | RS485 |
| Accuracy | 0.1% |
| Output | 4 ... 20 mA |
| Power Supply | 18 ... 30 V DC |
General dangers arising from misuse or operation by untrained personnel.
Environmental protection requirements for device installation.
Guidelines for cleaning and maintaining the module.
Explanation of residual dangers and associated symbols.
Details the items included in the scope of supply and optional accessories.
Provides a general overview of the MP60 module and its capabilities.
Instructions on connecting multiple MP60 or MP07 modules together.
Overview of the functional connections for MP60 and MP07 modules.
Details on power supply and control I/O for the MP60 module.
Information on the power supply connection for the MP07 module.
Instructions for connecting various types of transducers to the modules.
Description of the CAN interface connection and operation.
How to set up master/slave synchronization for MP60 modules.
Explanation of the operating principles and key functions of the MP60.
Step-by-step guide for commissioning the MP60 module.
Overview of parameter groups and individual parameters for setup.
General introduction to the MP60's CAN interface.
Explanation of how data is transferred cyclically via PDOs.
How to assign parameters using SDOs over the CAN interface.
Details the object directory for CANopen communication profiles.
Information on emergency objects used for error reporting.
Listing of manufacturer-specific objects in the object directory.
Manufacturer-specific objects available in floating-point format.
Practical examples demonstrating CAN interface usage.
To Next Page
