6
PME-MP60/MP07
A0616-13.4 enHBM
4.6 Synchronization (MP60)
Synchronization of modules guarantees the simultaneous acquisition and
processing of measurement data.
123456
ON
S10
123456
ON
Master
Slave
S10
S10
Fig. 4.9: Set up master/slave
When synchronising several modules, one device is to be declared as the
master. Set up all the other instruments as slaves.
Synchronization between modules should always - even if working without a
CAN-bus - be effected via the flat ribbon cable.
To Next Page
Loading...
