E-30
Configuring the Spider8 with the Setup program Ý Device-specific menus
Spider8
3 Device-specific menus
Device: Spider8
Zero balance Test Device... Bessel
Sampling Rate Filter Type (var.) Filter Frequency
20Hz600
Zero balance:
Zero balancing is carried out for all channels where ”Tare” has been
selected.
1. Click on the Zero balance button
The new zero balance values are displayed in the Tare value
column. The zero balance value is subtracted from the current
measured value. This means that the measured values are more
or less equal to zero after a zero balance.
To Next Page
Loading...
