Why does my Health O Meter 349KLXAD show 'Lo'?
If your Health O Meter Scales displays a 'Lo' message, this indicates that the batteries are discharged. Replace the batteries as per the instructions to resolve this issue.
Why my Health O Meter 349KLXAD Scales do not power on?
If your Health O Meter Scales do not power on, here are a few things you can check: 1. **Dead batteries:** Replace the batteries. 2. **Faulty electrical outlet:** Try using a different outlet. 3. **Bad power supply:** Replace the AC adapter.
What to do if my Health O Meter 349KLXAD Scales shows 'Over'?
If the display on your Health O Meter Scales shows the message “Over”, it means the load on the scale exceeds its capacity (400 lb / 180 kg). Remove the excess weight to ensure it is within the scale's limits.
How to fix Health O Meter Scales that won't turn on?
If your Health O Meter Scales does not power on, there are several possible causes: * Dead batteries: Replace the batteries. * Faulty electrical outlet: Try using a different outlet. * Bad power supply: Replace the AC adapter.
What to do if Health O Meter 349KLXAD display shows “Lo” message?
If your Health O Meter Scales display shows “Lo”, it means the batteries are low. Replace them following the instructions.
How to fix questionable weight on Health O Meter 349KLXAD?
If you're getting questionable weight readings or the Health O Meter Scales aren't zeroing properly, consider the following: 1. **External Interference:** Remove any objects that might be interfering with the scale. 2. **Incorrect Zeroing:** Ask the patient to step off the scale, ensure it displays “0.0”, and then restart the weighing process. 3. **Uneven Surface:** Place the scale on a level floor and begin the weighing process again. 4. **Calibration:** Check the weight using a known weight value.
Why is my Health O Meter Scales giving questionable weight?
If you are getting a questionable weight or the Health O Meter Scales does not zero, consider the following possibilities: * External object interfering: Remove any object from the scale. * Scale not zeroed: Have the patient get off the scale, zero it, and restart the weighing process. * Uneven surface: Place the scale on a level floor and begin the weighing process again. * Calibration issue: Check the weight using a known weight value.
What to do if Health O Meter 349KLXAD weighing takes too long?
If the weighing process on your Health O Meter Scales takes too long and the weight does not lock, it might be because the patient is not standing still. Ask the patient to remain still during the weighing process.
What to do if Health O Meter 349KLXAD display shows “Over” message?
If your Health O Meter Scales display shows the message “Over”, it means that the weight on the scale is more than its maximum capacity of 400 lb / 180 kg. Remove the excess weight to stay within the scale's limits.
What to do if Health O Meter 349KLXAD Scales weighing process takes too long?
If your Health O Meter Scales take too long to lock the weight on the display, it is likely because the patient is not standing still. Ask the patient to stand still during the weighing process.
General| Brand | Health O Meter |
|---|---|
| Model | 349KLXAD |
| Category | Scales |
| Language | English |
To Next Page