Hearth and Home Technologies IntelliFire Touch IFT-RC400 User Manual

Hearth & Home Technologies • IFT-RC400 & IFT-ACM Installation Instructions • 2326-982 Rev. Q • 4/21 12
Maintenance
Your appliance will remind you to schedule routine ser-
vice after 300 hours of Flame ON time is accumulated.
Please contact your dealer for a 300 hour inspection to
ensure your appliance is operating at peak performance.
1. Wake-up your remote control display by touching
anywhere on the touch screen.
2. Turn the remote over and insert, press and hold a
paperclip type object in the ‘P’ button hole for at least
10 seconds.
3. Double-beep from the remote will indicate that the
remote will reset the 300-hour maintenance reminder.
If the remote 300-hour maintenance message does not
clear on the rst try, repeat above steps.
To reset the 300-hour maintenance reminder if the RC400
displays the following message:
1. Wake-up your remote control display by touching
anywhere on the touch screen.
2. Tap the ‘Dismiss’ Icon. The system will reset the
maintenance reminder. Tap ‘Main Menu’ to return to
the main menu.
To reset the 300-hour maintenance reminder if the RC400
displays the following message:

Hearth and Home Technologies IntelliFire Touch IFT-RC400 Specifications

General

Brand	Hearth and Home Technologies
Model	IntelliFire Touch IFT-RC400
Category	Remote Control
Language	English