To Next PageTo Next Page
Need help?Do you have a question about the Hearth and Home Technologies IntelliFire Touch IFT-RC400 and is the answer not in the manual?
General| Brand | Hearth and Home Technologies |
|---|---|
| Model | IntelliFire Touch IFT-RC400 |
| Category | Remote Control |
| Language | English |
Important safety precautions and warnings before installing the IFT-RC400 and ACM components.
Guidelines for selecting the optimal placement location for the IFT-RC400 remote control.
Lists all components included in the IntelliFire Touch Remote Control and Auxiliary Control Module kit.
Step-by-step instructions for installing the IFT-RC400 and ACM components.
Detailed steps for connecting the IFT-RFM to the IFT-ECM and the IFT-ACM to the IFT-ECM.
Instructions for connecting fan, lights, and power vent kits to the IFT-ACM.
Procedure for installing the optional wall mount for the IFT-RC400 remote control.
Guide for installing batteries, setting the child lock, and accessing brand/dealer programming.
Procedure for dealers to program brand and contact information into the IFT-RC400.
Step-by-step guide for the initial pairing process between the IFT-RC400 and IFT-ECM.
Procedure to re-pair the IFT-RC400 after installing new accessories like ACM, blower, lights, or power vent.
Steps to take if the 'Now pairing remote to product' message appears during pairing.
Procedure to calibrate the IFT-RC400 touch screen if it becomes unresponsive.
Wiring diagram illustrating connections for the IntelliFire Touch system without a power vent.
Wiring diagram illustrating connections for the IntelliFire Touch system with a power vent.
How to set and maintain desired room temperature using the IFT-RC400 thermostat feature.
Instructions for toggling the appliance's flame ON or OFF using the remote control.
How to set the desired flame height level for ambiance and heat output control.
Operating timer, child lock, and lighting features on the remote control.
Adjusting fan speed and understanding power vent operation.
Explains temperature display, HOT, diagnostics menu, cold climate, and battery indicators.
Understanding backup battery and pairing status indicators.
Troubleshooting appliance errors, communication issues, and start-up failures.
Addressing pilot, fan, vent errors and remote battery replacement.
Information on scheduling routine service and resetting maintenance reminders.
Troubleshooting no response, unresponsive touchscreen, no dealer info, and maintenance reminders.
Addressing thermostat response, auto shut-off, and fan delay notifications.
Troubleshooting low battery warnings, incorrect brand, and start-up timer issues.
Troubleshooting appliance safety disabled, communication errors, and pairing issues.
Addressing thermostat response, safety timer, fan delay, and flame height issues.
Troubleshooting incorrect brand display and ignition sequence problems.
Troubleshooting remote communication errors and ACM command response issues.
Diagnosing 'Call Dealer Error' for fan, lights, and power vent, and fluctuating components.
Explains OFF, ON, and REMOTE switch position operations for the IFT-ECM.
Discusses multiple control priority and using the IFT-ECM pilot button.
Procedure for resetting the IFT-ECM when it enters a lock-out condition.
Explanation of ECM LED error codes and their corresponding descriptions.
Troubleshooting steps for pilot ignition failures involving sparking and lock-out codes.
Troubleshooting steps when the pilot does not light, with no noise or spark detected.
Troubleshooting steps for pilot ignition failures with specific LED lock-out codes.
Troubleshooting pilot ignition failures, including sparking, no spark, and lockout codes.
Addressing issues where pilot lights but burner does not, or appliance cycles rapidly.
Information regarding FCC compliance, warnings, and user authorization to operate the equipment.
Notice concerning digital apparatus compliance with Canadian radio noise emission limits.
Notice regarding compliance with Industry Canada's RSS-210 for device operation.
