To Next PageTo Next Page
Need help?Do you have a question about the Heat Controller DMC18SB-1 and is the answer not in the manual?
General| Phase | 1 |
|---|---|
| Refrigerant | R410A |
| Cooling Capacity | 18000 BTU/h |
| HSPF Rating | 9 |
| Voltage | 208/230V |
| Heating Capacity | 18000 BTU/h |
| Power Supply | 208/230V, 60Hz |
Guidance on safe installation practices, including electrical work and unit mounting.
Guidelines for safe operation, avoiding water, flammable gas, and confined spaces.
Safety measures for cleaning, battery replacement, and product disposal.
Detailed measurements for the indoor unit, including width, height, and depth.
Detailed measurements for the outdoor unit, including various length and width specifications.
Lists required installation parts and tools for setting up the unit.
Guidance on choosing optimal indoor and outdoor unit placement for performance.
Instructions for pipe cutting, flaring, and connecting the indoor and outdoor units.
Steps for connecting power supply and low voltage lines to the unit terminals.
Procedures for checking drainage and forming the piping for installation.
Explanation of operation indicators, timer indicators, and defrost indicators.
Procedure for performing a test run of the air conditioner unit.
Detailed guide to using the remote control for various unit functions.
Step-by-step instructions for disassembling the indoor unit components.
Visual representation of the refrigerant flow for cooling-only and cooling/heating models.
Guide to 2-way and 3-way valve operations and common troubleshooting steps.
Flowcharts for diagnosing issues with electronic parts and PCB operations.
Detailed electrical schematics for the indoor unit's control devices.
Wiring diagrams for outdoor units (9k, 12k, 18k, 24k) showing connections.
Technical specifications for cooling-only models, including capacity, power, and dimensions.
Technical specifications for cooling & heating models, including capacity, power, and dimensions.
